Components

Order any individual component of the StrutPro kit to use as a spare or replacement.

OpenandClosedYoke.JPG Standard Yoke (Open) Forward 8" Wide $75.00

Open (Forward) Yoke. Machined with nut cage.

HorseshoeClip.jpg Horseshoe Retaining Clip $8.00

One set of horseshoe retaining clips and chain. Clips are used to secure the horseshoe to either the forward or aft yoke assembly during the installation or removal process.

Qty
ColletRetainingStraps.jpg Collet Retaining Straps (Pair) $7.00

Two (2) Special made hook & loop Collet retaining straps are used to secure the collets to the prop shaft during the set up process. The straps are adjustable and firmly hold the Collets and shims (if required). Using two straps keeps the Collets parallel with the shaft when starting to push out the old bearing. Can be used over and over. Also great for securing mooring lines, extension cords, etc.

Qty
PropPullerPlate.jpg Prop Puller Plate (Fits Standard 8" Yokes) $30.00

Prop Puller. 2 & 4 blade prop puller plate converts your Strut Pro tool into an excellent prop puller. Position the open yoke to the forward side of the propeller hub. Next attach the prop puller plate to the aft yoke. Center the plate on the end of the prop shaft. Safety note: Only loosen the prop shaft nut. Do not remove the it until the prop has released from the shaft.

Mega Yoke (Open) Forward 10 1/2" Wide $140.00

10 1/2" Wide Open Yoke Only. 10 1/2" wide open (forward) yoke for the Strut Pro Mega tool. Machined with nut cage.

Mega Yoke (Open) Aft 10-1/2" Wide $140.00

10 1/2" Wide Open Yoke Only. 10 1/2" wide open (aft) yoke for the Strut Pro Mega tool. Machined without nut cage.

Standard Yoke (Open) Aft 8" Wide $65.00

Open (Aft) Yoke. Replacing the previous closed yoke. This enables the tool to be used to replace a intermediate strut bearing on double strut vessels without requiring the purchase of an additional open yoke.  

ShaftSleeveWithInsert640x480 Threaded Rod Sleeve With Insert $42.00

Threaded rod sleeves are seamless steel tubing with a non-metallic insert. The strut on small sail and power boats can be very close to the stern tube. These sleeves reduce the overall length of the long threaded rods. Slide the tubes over the long threaded rods before inserting through the aft yoke. Shortens the long threaded rods by 7-1/2". Includes a non-metallic insert which prevents contact between threads and aft yoke. Sold per pair.

ShaftSleeve34Reduced Shaft Spacers 3/4" To 1" Non Metallic (Per Pair) $8.00

Shaft spacers are used with the 3/4"prop shaft and shim the space to 1". Nests inside 1" x 1-1/4" Collets.

ShaftSleeve78 Shaft Spacers 7/8" To 1" Non Metallic (Per Pair) $8.00

Shaft spacers are used with the 3/4"prop shaft and shim the space to 1". Nests inside 1" x 1-1/4" Collets.

machinedforwardnutshort Machined Forward Nut (Short) $8.00

Special machined nut (short) nests inside the forward yoke cage.

Shim Tape $15.00

UHMW non-metallic shim material. The shim tape is adhesive backed and is .020". Perfect for shimming collets when replacing metric or off-standard bearing dimensions. Same as material shipped with Strut Pro repair yard kits.