Affordable, Damage Free
Strut Bearing Replacement
 No Prop Shaft, Strut or Rudder Removal

Cutless® is a registered trademark of Duramax® Marine LLC, all rights reserved.


Johnson Cutless® and Duramax® is a registered trademark of


Strut-Pro® is a registered trademark of Global Marine Industries, Inc. USA   All rights reserved.  2002-2016

The Most Cost Effective Marine Tool You Can Own!
“Manual or Hydraulic Operation”

Strut-Pro® tools are available in a variety of combinations, allowing you to customize your product for your particular needs. If you are a marine repair facility you will benefit most with one of our complete kits to handle a variety of sizes. A boat owner who wants to be prepared for unknown circumstances, however, can order the tool assembly for just his or her particular shaft and bearing size.

Individual Kits:

(Part Number 00121NAME)  Boat owners around the world have found tremendous benefits in owning a Strut Pro tool assembly for their boat.  A strut bearing failure can happen anytime either through age or restriction of water flow to the bearing. This is usually due to fishing line, underwater growth, even nets or rope becoming wrapped around the prop shaft.  Misalignment is also a main contributor to bearing wear.  If you are traveling to areas where services and supplies are limited it is a good idea to have an replacement bearing on board “just in case”. With Strut Pro many boat owners now replace their worn strut bearing without even hauling their vessel.  

When ordering for a single size bearing replacement, you will need to know the propeller shaft diameter and outside diameter of the bearing (bore of the strut).  This is exactly the same information needed to order a replacement strut bearing from a marine supply store. We use the same code as the Johnson Duramax® names for each strut bearing. You can cross reference when using Morse or other bearing brands. You order the tool and a bearing replacement assembly by bearing name.  For example, to order the single tool assembly for a 1 1/4” shaft x 2” bearing you would order (1) Part #:  00121 (Tool Only), and  (1) “BITE”, or the actual order number is 00121 BITE.   Refer to the accompanying chart sizes and bearing names for ordering. You can always call or email us if you need assistance.


Repair Yard Kits:

Sailboat / Small Yacht Repair Yard Kit

(Part Number 00122).  

This kit is includes all components needed for replacing any size domestic or metric bearings up to 2” outside diameter, making ideal for smaller yards that specialize in sailboats up to approximately 40’ and smaller yachts.

This kit can be expanded for larger sizes by ordering additional collets and horseshoes should you get a job with a larger bearing.   Call us if you have any questions.

Standard Complete Repair Yard Kit

(Part Number 00123)  

The Standard Complete Repair Yard Kit is our most popular tool assembly and includes all components needed for replacing any size domestic or metric bearings up to 3” outside diameter all in one kit.


Expanded Standard Complete Repair Yard Kit

(Part Number 00123.5)  

The Expanded Complete Repair Yard Kit expands our most popular tool assembly and includes all components needed for replacing any size domestic or metric bearings up to 3-1/2” outside diameter all in one kit. Includes all components for bearings up to 10” length.

Products & How To Order

Cutless Bearing Chart


SELECT YOUR SHAFT AND BEARING SIZE


NAME     SHAFT         STRUT I.D.       LENGTH

       

ABLE        3/4”               1 1/4”               3”

ACID         7/8”               1 1/4”               3 1/2”

APEX        7/8”               1 3/8”               3 1/2”

ATOM       7/8”               1 1/2”               3 1/2”

BACK       1”                  1 1/4”               4”

BADE       1”                  1 1/4”               6”

BAIT         1”                  1 3/8”               4”

BALE         1”                  1 1/2”                  4”

BAND       1                   1 5/8”               4”

BASE       1”                  2”                     4”

BEAM        1 1/8”            1 1/2”               4 1/2”

BELT        1 1/8”            1 5/8”               4 1/2”

BEND       1 1/8”            1 3/4”               4 1/2”

BILL           1 1/8”             2”                      4 1/2”

BIND          1 1/4”            1 1/2”               5”

BIRD          1 1/4”            1 3/4”               5”

BITE         1 1/4”            2”                      5”

BLOW       1 1/4”            2 1/8”               5”

BOAT       1 3/8”            1 7/8”               5 1/2”

BOLD       1 3/8”             2”                      5 1/2”

BOND        1 3/8”                2 1/8”                5 1/2”

BOOT       1 3/8”               2 3/8”                5 1/2”

BOSS       1 1/2”              2”                     6”

BRAD       1 1/2”            2 3/8”               6”

BREW      1 5/8”            2 1/8”               6 1/2”

BRIM        1 5/8”            2 5/8”               6 1/2”

BROW      1 3/4”            2 3/8”               7”

BUCK       1 3/4”            2 5/8”               7”

BULB        1 7/8”             2 5/8”                  7 1/2”

BULL          1 7/8”             2 15/16”               7 1/2”

CALL          2”                 2 5/8”                  8”

CALM         2”                   3”                    8”

CAME       2 1/8””           2 15/16”           8 1/2”

CAMP          2”                 2 3/4”                   8”

CAPE       2 1/8”            3 1/8”                 8 1/2”

CARD       2 1/4”            3”                        9”

CARE       2 1/4”            2 15/16”              9”

CART        2 1/4”             3 1/8”                   9”

CASE         2 1/4”            3 3/8”                          9”

COOK       2 3/8”            3 3/8”                          9 1/2”

CORD       2 1/2”            3 1/8”                        10”

CORK       2 1/2”            3 1/4”               10”

CORN       2 1/2”            3 3/8”               10”

COVE       2 1/2”           3 1/2”               10”

CRAB       2 5/8”           3 5/8”               10”

CROW      2 3/4”           3 3/8”               11”

CROW      2 3/4”           3 3/8”               11”

CUBE       2 3/4”           3 1/2”               11”

CURD       2 3/4”           3 3/4”               11”

CURE       2 7/8”           3 3/4”               11 1/2”

DANE       3”                 3 3/4”               12”

DARE       3”                 4”                       12”

DARK       3 1/8”           4 1/4”                 12 1/2”

DARN       3 1/4”           4”                     13”

DARN       3 1/4”           4”                     13”

DELL        3 1/4”           4 1/4”                 13”

DIKE        3 3/8”           4 1/2”                13”

DINE        3 1/2”           4 1/4”                14”



Tournament Ski / Wakeboard Boat Applications


(Part #00130) Complete Kit Includes All Sizes Below


Individual Kit (Based On Your Prop Shaft & Bearing Dimension)


Part #    Prop Shaft    Bearing o.d.   Strut Length

12812502   1”                   1-1/4”               8”

12813752    1”                   1-3/8”               8”

12813753     1-1/8”            1-3/8”               8”

12815002     1-1/8”            1 1/2”               8”

12815003           1-1/4”            1-1/2”               8”

Wakeboard / Tournament Ski Boat Repair Yard Kit

(Part Number 00130)  

New!  Tournament Ski / Wakeboard Kit

Our newest addition to our product line is for the Tournament Ski and Wakeboard boat applications.  These are a unique vessel with a extended length strut often using two short bearings.  Due to the strut length we produce special extra long collets to faciliate removal of both bearings.  The strut of a wakeboard boat is nearly twice as long as a standard yacht strut.  We can supply you with just what you need to get the job done, fast and damage free, without removing any components other than the prop.  Available individual kits or dealer / repair yard kit which includes accessories for all sizes.  You can order online now or call us with any questions.


MEGA Individual Kit
(Part Number 00121NAME)  
The Mega Series Individual Kit allows you to replace bearings from 2” through 4-1/4” o.d..  
MEGA Complete Repair Yard Kit
(Part Number 00124)  
The Mega Series Complete Repair Yard Kit allows you to replace bearings from 2” through 4-1/4” o.d..  All accessories included.

Note: All Strut Pro models are designed for hydraulic capabilities. Horseshoes and Collets are interchangeable. Hydraulic model is scheduled to be available mid 2016.
Download Owners Manual

Click Here

Go To The Store